Antye® Qi Wireless Charger for iPhone 6 & iPhone 6S (Including Wireless Charging Pad and Wireless Receiver Case), White

#Antye #Wireless #Charger #iPhone #iPhone #Including #Wireless #Charging #Wireless #Receiver #Case #White Antye® Qi Wireless Charger for iPhone 6 & iPhone 6S (Including Wireless Charging Pad and Wireless Receiver Case), White

Brand : Antye
Binding : Electronics
Color : White
EAN : 0889811360288
Label : Antaixin
Product Group : CE
Product Type Name : CONSUMER_ELECTRONICS
Manufacturer : Antaixin

Feature :

• For quick charging, we strongly recommend using more than 2A power to charge your phone,OR it will shows " cannot support this device" on your Phone,so pls don't connect your wireless charger pad to the laptop or computer, because the output from computer is only 500-800mA.
• Protective cases is suggested to be removed off during charging, it might affect the charging efficiency
• Flexible lightning connector, can be unplugged to allow WIRED charging and syncing your iPhone without removing it from the case, Easy access to wireless charging and wired charging.
• Low profile, Matte finish Qi receiver case, built-in Qi receiver chipset, enable your iPhone to charge wirelessly without plug a cord.
• Qi wireless charger kit for iPhone 6 and iPhone 6S (4.7 inches), including Qi wireless charging receiver case and Qi wireless charging pad, you don't need to buy them separately.

Buy Now

Antye® Qi Wireless Charger for iPhone 6 & iPhone 6S (Including Wireless Charging Pad and Wireless Receiver Case), White.

Specification (wireless receiver case):
Input Voltage: DC 5V / >1A
Input Current: more than 500mAh
Wireless Receiving Distance: 3-5mm
Wireless Charging Efficiency: more than 70% , less than 30% power will loss
Built-in Qi Wireless Receiver Module Chip
Working Frequency: 110 - 250KHz

We strongly recommend using 2A adapter at least. Don't connect to the computer, because output from computer is only 500-800mA.

Specification ( wireless charging pad):
Input: DC 5V/1500mA to 2000mA
Output: DC 5V 1000mA (MAX)
Frequency: 100 to 200 KHz
Wireless distance: less than 5 mm

Power Source:
AC Adaptor with micro USB port plugs into wireless charging pad.
The distance between wireless charging pad and receiver should not exceed 5mm/0.2 inch.
The input current should not be less than 1500mA to keep high energy efficiency.

Product Features:

1.Special inductive wireless charging receiver/case for iPhone 6/6s, simple design,just spare messy cables.

2.Seamlessly provide energy,less power loss but efficiency.

3.This product applies for all QI standard wireless charging pad.

4.The usb charging cable supplied is only able to charging, not for data transmission.

5.One Charger pad, Many Devices:It is compatible with all Qi-enabled phones ,phones Need special receiver or Need universal receiver,so it's versatile.

Our products have been well tested, examined and packaged before sending off. Any problem please feel free to contact us first so that we can supply the best service for you.

Package Contents:
1 x Qi receiver case for iPhone 6 / 6S
1 x Qi wireless charger pad
1 x Micro USB cable

#Antye #Wireless #Charger #iPhone #iPhone #Including #Wireless #Charging #Wireless #Receiver #Case #White

Buy Now

Antye® Qi Wireless Charger Pack for iPhone 5, 5S, SE (Including Wireless Charging Pad and Wireless Receiver Case)

#Antye #Wireless #Charger #Pack #iPhone #Including #Wireless #Charging #Wireless #Receiver #Case Antye® Qi Wireless Charger Pack for iPhone 5, 5S, SE (Including Wireless Charging Pad and Wireless Receiver Case)

Brand : Antye
Binding : Electronics
Color : Black
EAN : 0889957700351
Label : Antaixin
Product Group : CE
Product Type Name : WIRELESS_ACCESSORY
Manufacturer : Antaixin

Feature :

• Tips for using of that receiver case: 1. Installation: Plug the charging connector into charging port BEFORE you putting case on your iPhone. 2. Dismount: Unplug the charging connector AFTER you removing that case off your iPhone. OR the receiver Broken will happen
• That Charging Pad Built-in overvoltage, under-voltage and short circuit protection. Besides, non-slip ring set in the charging area prevents phone sliding, meanwhile, non-slip pads set on the bottom of the charger can avoid charger sliding
• 75% High power efficient, high speed charge as rapid as wired charger, never overcharges your battery or wastes energy
• Simply place your phone/device on the wireless charge area then charging starts. Blue light of charging LED indicator will light up automatically when charging
• Specially Designed for Apple iPhone 5, 5S, SE, Both wireless charging pad and Wireless Receiver Case Included.

Buy Now

Antye® Qi Wireless Charger Pack for iPhone 5, 5S, SE (Including Wireless Charging Pad and Wireless Receiver Case).

Specification (wireless receiver case):
Input Voltage: DC 5V /1A
Input Current: more than 500mAh
Wireless Receiving Distance: 3-5mm
Wireless Charging Efficiency: more than 70%
Built-in Qi Wireless Receiver Module Chip

Specification (wireless charging pad)
Input: DC 5V/2A
Output: DC 5V/1A
Wireless distance: 5 mm
Micro USB Cable Included
Supported devices: LG G2, Google Nexus 4/5/6 , Nokia Lumia 920/820 , Samsung Galaxy S7/S7 Edge/S6/S6 Edge/Edge Plus/Note5 and any Qi-enabled Smartphones.

Warning

1. For Consistent Performance, Use a Qi Charger that Support at least 1A Output and is Qi Compliant, with a USB Adapter Supporting 1.5A or Above. Some Low-end Qi Chargers are Not Fully Standard Conforming and May Cause on-and-off Charging When iPhone is Nearly Full.

2. We Strongly Recommend Using 2A Adapter at least. Don't Connect to the Computer, Because Output from Computer is Only 500-800mA.

3. AC Adapter Not Included, Please Confirm your Devices is Qi Standard.

4.The distance between wireless charging pad and receiver should not exceed 5mm/0.2 inch.

5.The Receiver Case only fit for iPhone 5 / 5s / SE, Cannot compatible with other cell phones.

Package Contents:
1 * Qi receiver case for iPhone 5 / 5S / SE
1 * Qi wireless charger pad
1 * Micro USB cable

Our products have been well tested, examined and packaged before sending off. Any problem please feel free to contact us first so that we can supply the best service for you. #Antye #Wireless #Charger #Pack #iPhone #Including #Wireless #Charging #Wireless #Receiver #Case

Buy Now

Antye® QI Wireless Charger for iPhone 6 / iPhone 6S ( Including Wireless Receiver Case with Detachable Lightning Connector and Qi Wireless Charging Pad), Black

#Antye #Wireless #Charger #iPhone #iPhone #Including #Wireless #Receiver #Detachable #Lightning #Connector #Wireless #Charging #Pad #Black Antye® QI Wireless Charger for iPhone 6 / iPhone 6S ( Including Wireless Receiver Case with Detachable Lightning Connector and Qi Wireless Charging Pad), Black

Brand : Antye
Binding : Electronics
Color : Black
EAN : 0889811360295
Label : Antaixin
Product Group : CE
Product Type Name : CONSUMER_ELECTRONICS
Manufacturer : Antaixin

Qi wireless charger kit for iPhone 6 / iPhone 6S (4.7 Version), including Qi wireless charging receiver case and Qi wireless charging pad, you don't need to buy them separately.
Low profile, Matte finish Qi receiver case, built-in Qi receiver chipset, enable your iPhone to charge wirelessly without plug a cord.

Buy Now

Specification (wireless receiver case): Input Voltage: DC 5V / >1A Input Current: more than 500mAh Wireless Receiving Distance: 3-5mm Wireless Charging Efficiency: more than 70% , less than 30% power will loss Built-in Qi Wireless Receiver Module Chip Working Frequency: 110 - 250KHz We strongly recommend using 2A adapter at least. Don't connect to the computer, because output from computer is only 500-800mA. Specification ( wireless charging pad): Input: DC 5V/1500mA to 2000mA Output: DC 5V 1000mA (MAX) Frequency: 100 to 200 KHz Wireless distance: less than 5 mm Power Source: AC Adaptor with micro USB port plugs into wireless charging pad. The distance between wireless charging pad and receiver should not exceed 5mm/0.2 inch. The input current should not be less than 1500mA to keep high energy efficiency. Product Features: 1.Special inductive wireless charging receiver/case for iPhone 6/6s, simple design,just spare messy cables. 2.Seamlessly provide energy,less power loss but efficiency. 3.This product applies for all QI standard wireless charging pad. 4.The usb charging cable supplied is only able to charging, not for data transmission. 5.One Charger pad, Many Devices:It is compatible with all Qi-enabled phones ,phones Need special receiver or Need universal receiver,so it's versatile. Our products have been well tested, examined and packaged before sending off. Any problem please feel free to contact us first so that we can supply the best service for you. Package Contents: 1 x Qi receiver case for iPhone 6 / 6s 1 x Qi wireless charger pad 1 x Micro USB cable

Feature :

• Qi wireless charger kit for iPhone 6 / iPhone 6S (4.7 Version), including Qi wireless charging receiver case and Qi wireless charging pad, you don't need to buy them separately.
• Low profile, Matte finish Qi receiver case, built-in Qi receiver chipset, enable your iPhone to charge wirelessly without plug a cord.
• Flexible lightning connector, can be unplugged to allow WIRED charging and syncing your iPhone without removing it from the case, Easy access to wireless charging and wired charging.
• Protective cases is suggested to be removed off during charging, it might affect the charging efficiency
• For quickly charging, we strongly recommend using more than 2A power to charge your phone,OR it will shows " cannot support this device" on your Phone,so pls don't connect your wireless charger pad to the laptop or computer, because the output from computer is only 500-800mA.

Buy Now